We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Make a Reflecting Telescope for Kids: A Simple Step-by-Step Guide

Learn how to make a reflecting telescope for kids with simple materials, clear steps and safety tips. Build a working stargazing scope your family can use tonig

Updated November 2026

Learning how to make a reflecting telescope for kids is a fun weekend project that teaches real optics. In this guide, you will build a simple tabletop reflector using a concave mirror, a light tube and a basic eyepiece holder. The result will show the Moon’s craters and Jupiter’s moons, and your kids will understand how light bends and focuses inside the tube.

What You Need Before You Start

A simple reflector needs only a few parts, and most can be found at a hardware store or a craft shop. Adult supervision is recommended for any cutting or gluing.

Shopping for one? See our guide: National Geographic Beginner Telescope: 3 Best Picks for Kids and Families.

  • A cardboard or PVC tube, roughly 12 to 18 inches long
  • A concave mirror, ideally a spherical mirror with a long focal length (a telescope mirror blank or a shaving or cosmetic mirror works for a demonstration)
  • A flat secondary mirror, or a small piece of mirror tilted at 45 degrees
  • A plastic eyepiece lens (a magnifying lens of short focal length)
  • Strong tape, hot glue, a craft knife and a ruler
  • A cardboard base or small wooden stand for stability

Step-by-Step: Assembling the Reflector

Work in order so each part is supported before you add the next. Keep the mirror surfaces clean and touch only the edges.

  1. Mount the main mirror. Fix the concave mirror at the back end of the tube, reflective side facing the open front. Use glue or tape around the edge, not across the reflective surface.
  2. Cut the eyepiece hole. Cut a hole in the side wall near the front of the tube, about 1 inch wide. This is where you will look in.
  3. Angle the secondary mirror. Place the flat mirror inside the tube, tilted at 45 degrees, so it sends the converging light out through the side hole.
  4. Attach the eyepiece. Glue the eyepiece lens over the side hole, aligned with the light beam from the flat mirror.
  5. Add the stand. Mount the tube on a cardboard cradle so it can tilt toward the sky.

Aiming and Focusing the Telescope

Point the open front of the tube at a distant object, such as a tree or a streetlight, during the day first. Look into the eyepiece and slide the flat mirror slightly toward or away from the eyepiece until the image is sharp. This adjustment is the focusing step, and it is the part kids enjoy most.

Testing at Night

Once the image is sharp in daylight, take the telescope outside after dark. The Moon is the easiest first target because it is bright and its edge shows crisp detail. Jupiter, with its four bright moons, is the next best target if it is up in the evening sky.

Common Mistakes to Avoid

  • Touching the mirror surface, which leaves smudges that blur the image
  • Using a tube that is too short, which can cause the focus point to fall outside the eyepiece range
  • Looking at the Sun through any homemade telescope, which can cause permanent eye damage
  • Expecting faint deep-sky objects; a homemade reflector shows the brightest targets best
  • Skipping the daytime test, which makes night-time focusing frustrating

If you want a sturdier build or ready-made parts, these options can save time.

  • A kid-friendly beginner telescope gives you a working reference to compare your homemade scope against: View on Amazon
  • A basic reflector kit with mirror and tube components helps you skip sourcing the optics: View on Amazon
  • A simple tabletop reflector stand gives your homemade tube a steady base for viewing: View on Amazon

For a broader comparison of styles before you build, see Telescope Reflector or Refractor: How to Choose the Right One for Your Family and Make a Dobsonian Telescope: 6 Best Picks Compared for Beginners.

FAQ

Can kids build a reflecting telescope safely?

Yes, with adult help for cutting and gluing. Kids can handle mirror placement and focusing once the parts are secured.

How powerful is a homemade reflector?

Homemade reflectors give modest magnification, enough to see the Moon’s craters and Jupiter’s largest moons. They are best for bright targets rather than faint galaxies.

Do I need a special mirror?

A concave mirror with a long focal length works best. A cosmetic mirror can demonstrate the principle, but for clearer views, a proper telescope mirror is worth sourcing.

Conclusion

Building a reflecting telescope teaches kids how mirrors gather and focus light, and the first view of the Moon makes the effort feel worthwhile. Start with the daytime focus test, then move outside after dark. Once your family is hooked, you can upgrade parts or try a ready-made model.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our astronomy for kids, teens & families guides, checking product details against manufacturer specifications and owner feedback.

About the author

Caleb Morgan
Caleb Morgan

Caleb Morgan writes reviews and buying guides for Youth in Astronomy.