Meade Infinity 70 Refractor Telescope: Setup, Use and Buying Tips for Families
Learn how to set up, use and choose a meade infinity 70 refractor telescope for family stargazing, with simple steps, tips and gear suggestions.
Updated November 2026
A meade infinity 70 refractor telescope is a small, lightweight scope that gives young astronomers their first sharp views of the Moon, bright planets and star clusters. This guide walks you through setting it up, aiming it at the night sky and avoiding the mistakes that make first nights frustrating. By the end, you will know how to get a clear image in about 20 minutes.
What the Meade Infinity 70 Is Best At
A 70mm refractor uses a glass objective lens to gather light, which produces bright, high-contrast views with no central obstruction. The Infinity 70 suits families because it is compact and easy to carry to a backyard or a dark spot near home. Expect it to show the Moon’s craters in detail, Jupiter’s cloud bands and its four largest moons, and Saturn’s rings as a small but clear disk.
Shopping for one? See our guide: Reflector or Refractor Telescope for Beginner: Which Should You Choose?.
Keep your expectations realistic. Faint galaxies and nebulae will look like soft gray smudges rather than the colorful photographs you see online. Many families find that the Moon and planets are the most rewarding targets for the first few sessions.
How to Set Up the Telescope Step by Step
Setup takes less time than most people expect, but doing the steps in order prevents wobbles and misaligned views.
- Place the tripod on firm, level ground. Extend the legs to a comfortable height for the observer, and tighten the leg locks evenly.
- Attach the mount head to the tripod and tighten the center bolt by hand.
- Mount the optical tube to the mount and secure the clamps so the tube does not slide.
- Insert the eyepiece into the focuser and tighten the thumbscrew. Start with the lowest-power eyepiece included with the scope.
- Remove the dust cap from the front of the tube only when you are ready to observe, and keep the cap for storage.
Give the scope 10 to 15 minutes to reach outdoor temperature before you judge image quality. Glass that is colder or warmer than the air will show shimmer and softness.
Finding and Focusing Your First Target
Start with the Moon. It is bright, easy to find and forgiving of small aiming errors. Sight along the tube, which points roughly where the finder shows, and look through the eyepiece. Turn the focus knob slowly until the edge of the Moon is sharp. If you overshoot, reverse the direction and move past the sharp point again.
For planets, use the same method but expect a smaller image. Jupiter and Saturn are most rewarding when the air is steady and the planet is high in the sky, away from rooftops and streetlights. If the image jitters, wait a few minutes; it often settles.
Choosing Eyepieces for Different Targets
Low power gives a wide field and bright view, which suits the Moon and star clusters. Higher power magnifies planets and double stars but dims the image and shows more shake. Swap eyepieces one at a time, refocus after each change, and avoid pushing magnification beyond what the night air allows.
Practical Checklist for Your First Session
- Telescope, tripod and all eyepieces, with the dust caps in a safe place
- A red-filtered flashlight so eyes stay dark-adapted
- A star chart or free stargazing app to plan targets
- Warm layers, a chair and a blanket for every observer
- A notebook to record what each person sees
Common Mistakes and Helpful Tips
- Setting up under a streetlight. Move a short distance into darker shade if you can.
- Touching the glass with bare fingers. Keep covers on and handle the tube by its body.
- Starting with the highest-power eyepiece. Begin low and work up as the image allows.
- Forgetting to refocus after changing eyepieces. Every swap shifts the focus point.
- Expecting deep-sky photographs. Visual observing shows subtle, gray-toned views of distant objects.
Recommended Gear
A simple red flashlight protects night vision while you read charts and adjust settings. View on Amazon
A planisphere helps beginners match the sky to a chart at any time of night. View on Amazon
A stable stool lets younger observers reach the eyepiece without straining. View on Amazon
FAQ
Is the meade infinity 70 refractor telescope good for kids?
Yes, it is light enough for children to help carry and set up with supervision. Its bright, sharp views of the Moon and planets keep young observers engaged.
What can I see with a 70mm refractor?
You can see lunar craters, Jupiter’s cloud bands and moons, Saturn’s rings, and bright star clusters. Faint deep-sky objects will appear dim and gray.
Do I need special accessories to start?
No, the included eyepieces are enough to begin. A red flashlight and a star chart will make early sessions far more enjoyable.
Conclusion
With a steady tripod, careful focusing and a dark, calm night, the meade infinity 70 refractor telescope delivers clear, rewarding views of the Moon and planets. Start low on magnification, take your time and let each family member take a turn. Try the tips above on your next clear evening and keep a log of what you see.
Related reading
- Meade 102mm Refractor Telescope: Setup, Use and Buying Tips (2026)
- Which Refractor Telescope for Planets Should Families Buy? Key Factors
- What Is a Refractor Telescope Used For? Uses and Who Should Buy One
- Vivitar 60x/120x Refractor Telescope Review: Is It Worth It?
- Telescope Reflector or Refractor: How to Choose the Right One for Your Family
Ready to choose one?
