We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Orion SkyScanner BL135mm Dobsonian Reflector Telescope: A Beginner’s Guide

Learn what the Orion SkyScanner BL135mm Dobsonian reflector telescope can show your family, how to set it up, and tips for better nights under the stars.

Updated November 2026

The Orion SkyScanner BL135mm Dobsonian reflector telescope is a simple, tabletop-friendly way for families to start stargazing. In this guide, you will learn what the scope is built for, how to set it up in about 15 minutes, and how to find your first targets without frustration. Most of what you need is common sense, plus a few habits that make a big difference on the first night.

What the SkyScanner BL135mm Is Built For

The SkyScanner is a Dobsonian-style reflector, meaning it uses a curved mirror to gather light and an altitude-azimuth mount that you move by hand. The 135mm figure refers to the diameter of the primary mirror, which is the number that matters most for how much light the scope collects. A larger mirror gathers more light, so it shows fainter objects and more detail on bright ones.

Shopping for one? See our guide: 5 Best Orion SkyQuest XT10 Classic Dobsonian Telescope Alternatives (2026).

Reflectors like this one suit visual observing rather than photography. Expect to see the Moon’s craters in sharp detail, the rings of Saturn, the moons of Jupiter, and bright star clusters. Galaxies and nebulae appear as faint, gray patches rather than the colorful images in photographs. For a broader comparison of design types, see Reflector Telescope vs Dobsonian: Which Should You Choose?.

Setting Up the Telescope Step by Step

Setup is quick, but doing it in daylight saves time and frustration after dark. Work through these steps before the sun goes down.

  1. Place the base on a flat, stable surface such as a sturdy table or the ground. Keep it away from wind and uneven patches.
  2. Attach the altitude bearings and tube according to the manufacturer’s instructions, making sure the tube moves freely up and down.
  3. Insert the eyepiece with the lowest magnification first. Lower power gives a wider view, which makes it easier to find objects.
  4. Point the tube at a distant daytime target, such as a tree or rooftop, and focus until the image is sharp. This gives you a rough focus before dark.
  5. Let the scope acclimate outdoors for 20 to 30 minutes so the mirror matches the outside temperature. Warm mirrors produce blurry, shimmering images.

For a deeper walkthrough of this kind of setup, the family-focused guide at 8-inch Dobsonian Reflector Telescope: A Step-by-Step Guide for Families covers many of the same steps.

Finding Your First Targets

Start with the Moon. It is bright, easy to locate, and reveals plenty of detail even in a light-polluted yard. Once you have the Moon in focus, move to Jupiter, which shows its four largest moons as tiny points of light lined up beside it. Saturn comes next, and if its rings are visible, you will likely notice them even at low power.

Use a simple star chart or a free sky app to locate targets before you aim the scope. Move the tube slowly and scan along a line from a bright star you can identify. The finder scope, if your model includes one, helps you center the target before you look through the eyepiece.

Dark skies make a real difference for faint objects. A backyard in a city will still show the Moon and planets well, but star clusters and galaxies look best away from streetlights.

Tips for Better Nights Under the Stars

  • Let the telescope cool down before judging image quality, since a warm mirror causes blur.
  • Use low power to find objects, then increase magnification gradually once they are centered.
  • Give your eyes 20 to 30 minutes in the dark. Avoid bright phone screens during that time.
  • Dress warmly and keep a red flashlight handy. Cold hands make focusing harder.
  • Observe on nights with steady air. Stars that twinkle heavily usually mean poor views of planets.

A few accessories can make the first season more comfortable and rewarding for the whole family.

  • A red-light flashlight preserves your night vision while you adjust eyepieces and read star charts. View on Amazon
  • A planisphere or printed star chart helps you identify constellations without a phone screen. View on Amazon
  • A telescope-specific cleaning kit keeps the eyepiece and lens surfaces free of dust and fingerprints. View on Amazon

FAQ

Is the SkyScanner BL135mm good for young children?

Yes, with supervision. Its size and simple mount make it manageable for older kids, and younger children can enjoy the Moon and planets with an adult helping them focus.

Can I see galaxies and nebulae with this telescope?

You can see a few of the brighter ones, but they will appear as faint, gray smudges rather than colorful images. Dark skies and patience give the best results.

Do I need special eyepieces to get started?

No. The included eyepieces are enough for the Moon, planets, and bright star clusters. Add more only after you know what you want to explore.

Conclusion

With a little daytime preparation, the SkyScanner BL135mm can deliver sharp views of the Moon and planets on your first clear night. Start low in power, let the mirror cool, and scan slowly to find targets. Over time, your family will learn the sky one object at a time, and that steady progress is the real reward.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our astronomy for kids, teens & families guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer
Owen Palmer

Owen Palmer writes reviews and buying guides for Youth in Astronomy.