We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Celestron Astromaster 90az Refractor Telescope with 3-axis Smartphone Adapter: A Practical Guide (2026)

Learn how to set up a Celestron AstroMaster 90AZ refractor telescope with a 3-axis smartphone adapter, from alignment to first photos of the Moon.

Updated November 2026

A celestron astromaster 90az refractor telescope with 3-axis smartphone adapter lets you line up a phone camera with the eyepiece and take steady pictures of the Moon, Jupiter and bright star clusters. This guide walks you through the setup, the alignment steps and the settings that matter most, so your first night out ends with photos you can actually share.

What You Need Before You Start

Gather everything before dark so you are not fumbling with small parts under a red flashlight. Most families find the job goes faster with a second person holding the phone.

Shopping for one? See our guide: 4 Best Celestron Astromaster 90az Telescopes with Nexyz Smartphone Adapter (2026): Our Picks.

  • The telescope tube, mount and tripod, assembled according to the manufacturer’s manual
  • A 25 mm or similar eyepiece matched to the telescope
  • The 3-axis smartphone adapter with its clamp and tension knobs
  • Your phone, charged, with the camera app and a timer or burst mode ready
  • A red-filtered flashlight, a warm layer and a chair

Step 1: Attach the Adapter and Center the Phone

Slide the adapter onto the eyepiece holder and tighten it so nothing wobbles when you gently tap the tube. Then clamp your phone into the holder, lens side aligned with the eyepiece. Turn on the phone’s camera, point at a distant object in daylight, and adjust the three axis knobs until the bright circle of the eyepiece view is centered on the lens.

Step 2: Focus and Align on a Daytime Target

Focus the telescope on a far-off object such as a rooftop or tree line in the afternoon. Rotate the focus knob until the image is sharp in the eyepiece and the phone screen. Manufacturers specify that the three axes let you tilt the phone slightly in each direction, so make small adjustments and recheck the screen rather than forcing the clamp.

Step 3: Shoot the Moon and Planets at Night

The Moon is the easiest first target because it is bright and holds still well enough for a phone. Start with a low-power eyepiece, center the Moon, then switch to a higher-power eyepiece for more detail. Use your phone’s timer or burst mode so the shutter does not shake the image, and take many frames, since a few will come out sharper than the rest.

Settings That Help

Lower the exposure if the Moon looks blown out, and tap to focus on the brightest edge of the disc. Planets are small and faint, so expect soft results at first. Use a short timer delay so the vibration of your touch settles before the shot.

Target Eyepiece approach Phone tip
Moon Start low power, then step up Lower exposure, use burst mode
Jupiter and Saturn Higher power, steady air Use timer, take many frames
Star clusters Low power, wide field Longer exposure, tripod still

Step 4: Protect Your Night Vision and Your Gear

Use a red light so your eyes stay adapted to the dark. Keep the phone clamp tight but not overtightened, and never point the telescope at the Sun, even briefly, because direct sunlight through the optics can cause permanent eye damage and damage the phone. Consult a professional optician if the optics need cleaning or repair.

Common Mistakes

  • Skipping the daytime focus, which leaves the image soft at night
  • Letting the phone hang loosely, causing shaky frames
  • Using only one shot instead of a burst of frames
  • Setting exposure too high, so the Moon looks washed out
  • Trying to photograph faint objects before mastering the Moon

A sturdy phone holder helps if you want more control than the included clamp gives you. A red flashlight keeps your night vision intact while you adjust settings. A fitted telescope cover keeps dust off the optics between sessions.

  • A red-light headlamp keeps your hands free while you adjust the three axis knobs. View on Amazon
  • A sturdy tabletop or tripod phone mount reduces shake during long exposures. View on Amazon
  • A dust cover protects the lens between sessions. View on Amazon

FAQ

Do I need a special phone to use this adapter?

No. Most modern smartphones with a rear camera can be clamped into the adapter. Check that your phone’s camera lens lines up with the eyepiece once it is clamped.

What is the best first target?

The Moon is the most forgiving choice because it is bright and easy to find. Planets come next once you have learned how to focus and steady the phone.

Why are my photos blurry?

Blur usually comes from a loose mount, an unsteady phone or incorrect focus. Retighten the connections, refocus on a daytime object and use your phone’s timer.

Conclusion

With the adapter centered, the telescope focused in daylight and a steady timer setup, the Moon and bright planets become realistic targets on your first clear night. Practice on the Moon, keep the red light handy and build your skills one session at a time.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our astronomy for kids, teens & families guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer
Owen Palmer

Owen Palmer writes reviews and buying guides for Youth in Astronomy.