We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Meade Infinity 70mm Refractor Series Telescope with Smartphone Adapter: A Practical Guide (2026)

Learn how to set up a Meade Infinity 70mm refractor series telescope with a smartphone adapter, with simple steps, tips and gear for family stargazing nights.

Updated November 2026

A Meade Infinity 70mm refractor series telescope with smartphone adapter lets your family point a small scope at the Moon, bright planets and star clusters, then snap photos or watch the view on a phone screen. This guide walks you through a clean setup, a simple first observing session and the mistakes that trip up most beginners. Plan on about 20 minutes for your first setup and a full evening of looking once you get the hang of it.

What You Need Before You Start

Gather the parts before the sun goes down so you are not hunting for screws in the dark. Most families find that a clear, flat spot and a red-filtered flashlight make the whole process smoother. For a broader look at the scope itself, see Meade Infinity 70mm Altazimuth Refractor Telescope: Setup and Buying Guide.

Shopping for one? See our guide: Carson Refractor Telescope with Smartphone Adapter: 7 Best Picks (2026).

  • The telescope tube and altazimuth mount
  • A tripod, with the legs fully extended and locked
  • Eyepieces, usually supplied as a low- and a higher-power pair
  • The smartphone adapter and a phone with a camera and a case you can remove
  • A red-filtered flashlight or a headlamp with a red setting
  • A printed or app-based star chart

Step-by-Step Setup on the Mount

Start by setting the tripod on firm ground and spreading the legs evenly. Attach the mount head, then the tube, tightening the knobs by hand. Avoid overtightening, since plastic threads can strip.

  1. Level the tripod head as well as you can by eye.
  2. Insert the lower-power eyepiece into the focuser and tighten the locking screw.
  3. Point the tube at a distant daytime object, such as a rooftop or tree, and focus until the image is sharp.
  4. Loosen the altitude and azimuth locks and move the tube by hand to check that it turns smoothly.
  5. Choose a bright, easy target like the Moon for your first session.

Attaching the Smartphone Adapter

The adapter holds your phone over the eyepiece so the camera lines up with the optical axis. Remove the phone from its case, open the camera app, and set it to a still-photo mode with the flash turned off. Slide the phone into the adapter, then tighten the clamp until the phone sits steady without bending.

Look through the eyepiece first and center your target. Then check the phone screen. You should see a round, bright image filling most of the frame. If you see a black ring or a corner cutoff, nudge the phone up, down or sideways until the circle is as large and centered as possible.

Tips for Getting a Clear Photo

Use the phone’s timer or a Bluetooth shutter release so your finger does not shake the scope. Lower-power eyepieces give a wider, brighter view that is easier to frame. Shoot a few dozen frames of the Moon and review them on a larger screen later.

A Simple First Observing Session

Keep your first night short, around 30 to 45 minutes, so the kids stay interested. Begin with the Moon, then move to Jupiter or Saturn if they are up. Use a planetarium app or a paper star chart to find targets, and let each child take a turn at the eyepiece. For more ideas on what to see, the Meade Infinity 70 Refractor Telescope: Setup, Use and Buying Tips for Families article covers family-friendly targets in detail.

Common Mistakes

  • Setting up in a backyard with streetlights shining directly into the tube. Move to a darker spot if you can.
  • Forgetting to refocus after changing eyepieces or after temperatures drop.
  • Leaving the phone in its case, which keeps it from sitting close enough to the eyepiece.
  • Trying to view deep-sky objects at high power. Start low and work up.
  • Letting the scope cool too little. Bring it outside 15 to 20 minutes before you observe so the air inside the tube settles.

A red-filtered headlamp keeps your night vision intact while you adjust the scope. A planisphere or star-chart app helps you find targets quickly. A Bluetooth remote shutter release is a small, inexpensive way to steady your phone photos.

  • A red-light headlamp helps you read charts without ruining your dark adaptation. View on Amazon
  • A rotating planisphere shows the sky for any date and time, which suits beginners. View on Amazon
  • A Bluetooth phone shutter remote avoids shaking the scope during photos. View on Amazon

FAQ

Can I use any smartphone with this adapter?

Most phones fit as long as the clamp can hold them securely. Check the adapter’s listed phone-width range against your model before you buy or set up.

What is the best first target for a 70mm refractor?

The Moon is the easiest and most rewarding first target, since it is bright and shows crater detail. Jupiter and Saturn are good next steps when they are visible.

Do I need to be an expert to get photos?

No. Center the target, steady the phone, and take many shots. Practice on the Moon first, and your results will improve quickly.

Conclusion

With a level tripod, a careful eyepiece focus and a well-seated phone, your family can capture photos and enjoy the sky together. Keep early sessions short, use a dark site, and take turns at the eyepiece. Check current product details and any setup instructions from the manufacturer before you start.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our astronomy for kids, teens & families guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer
Owen Palmer

Owen Palmer writes reviews and buying guides for Youth in Astronomy.